top of page
We provide best solution for turbine and generator in Asia
Mahamek and Citic
Facts about Citic
 - Citic is the top 3 manufacturer of turbine in China, with manufacturing power of more than 100 turbines and generator annually.
​
- Citic specializes in development and utilization of waste heat turbo sets and turnkey projects below 200MW in both domestic and international.
​
 - With their long history since 1979, the Chinese government trusts them with many of their projects including oversea aid projects in Australia, Costa Rica, Columbia and Vietnam.  
​
 - They have produced more than 500 power plant projects up to date.
​
 - Citic also manufacture turbines parts for other top 5 turbine manufacturer in China and OEM manufacturer.
​
 - Citic have a work force of more than 10,000, therefore all there production are in-house, including metal casting, both hot and cold work machines. This is crucial as we can provide all the custom design needs of our customer.
Citic Steam Turbine
 - Our turbine and generator are individually test run before leaving the factories
​
 - With its sturdy design , it is especially built for stable and reliability, low maintenance, long life of up to 30 years (depend on working conditions).
​
 - Under some conditions our turbine efficiency will be very high of up to 6 kg/kW.h.
​
 - Most of our designs are Horizontal Split Case, with easy installation and calibration
​
 - With proper foot mount, the degree of error on axial movement is less than 0.3mm.
​
 - All standard designs come with stainless steel turbine shaft and blades.
​
 - Citic have its own development and design center, co-research with Xi'an Jiaotong University, and have developed its own steam-supplementing double pressure turbogenerator, widely use in cement kiln pure low temp. waste heat power generation.

Condenser unit

Huge capacity, standard design consist of 2 inlet pipe runs in U-shape.

Back pressure Steam Turbine
 This series of steam turbine is high efficiency of central heating and cogeneration model.
​
 After the steam through turbines (differential pressure temperature difference) to generate electricity, Low pressure steam heat supply users make energy heat utilization rate at the high level.
​
 Power generation and steam supply is proportional to each other. The electrical load and thermal load is proportional to each other.
​
 The power cannot independent produce without thermal load.
​
 Electric load and heat load cannot be adjusted at the same time.
​
 Suitable for the heat stable enterprises.
​
 Inlet steam pressure level 2.35 Mpa - 8.82 Mpa. Exhaust steam pressure based on user need to design and manufacture
1.Stand frame 2.Front bearing block 3.Main oil pump 4.Thrust bearing and front bearing 5.speed governor 6.Front steam seal 7.Front cylinder 8.Regulating steam valve and connecting rod 9.Nozzle          10.Steering vane ring 11.Compound speed hanging impeller 12.Pressure diaphragm plate          13.Pressure augmented impeller 14.exhaust port 15.Rear cylinder 16.Rear steam seal 17.Mainshaft  18.Rear bearing 19.Steam coupling 20.Front bearing of gear box 21.Reduction gear                        22.Rear bearing of gear box 23.Generator end coupling
Condense Steam Turbine
Pure power turbine, Inlet steam pressure level 0.6Mpa-121Mpa.
​
A single pressure and double pressure inlet steam.
​
Various specifications and types of more than 90 kinds.
​
According to user waste heat resources and parameter design to manufacture.
1 Stand frame 2  Front bearing block 3  Main oil pump 4  Thrust bearing and front bearing                     5  speed governor 6  Front steam seal 7  Front cylinder 8  Regulating steam valve and connecting rod      9  Nozzle 10  Steering vane ring 11 Compound speed hanging impeller 12  Pressure diaphragm plate         13  Pressure augmented impeller 14  exhaust port 15  Rear cylinder 16  Rear steam seal 17  Mainshaft    18 Rear bearing 19  Steam coupling 20  Front bearing of gear box  21 Reduction gear 22  Gearbox           23  Rear bearing of gear box 24  Generator end coupling
Extraction Steam Turbine
 This series of steam turbine include single cylinder, single extraction steam, impulse type.
​
 There are two sets of adjusting mechanism can regulate the quantity of the extraction steam turbine and power at the same time.
​
 Power and heating adjustment flexibility is very large.
​
 It can provide adjustable electric power and factory steam at the same time.
​
 Now existing 50 kinds of specifications. Inlet steam pressure level 2.35Mpa-121mpa. Extr press 0.2 Mpa-2.35 Mpa.
1 Oil tank base support 2 Front bearing block 3 Main oil pump 4 tachometer  5 speed governor                 6 Thrust bearing and front bearing 7 Front steam seal                                                                        8 High pressure regulating steam valve and connecting rod 9 Front cylinder 10 High pressure nozzle        11 High pressure rotor guide vane ring 12 High pressure compound speed impeller                                 13 Low pressure regulating steam valve and connecting rod 14 Middle partition                                     15 Low pressure rotor guide vane ring 16 ow pressure compound speed impeller                                  17 Pressure diaphragm plate 18 Pressure augmented impeller 19 Mainshaft 20 Rear cylinder                   21 Rear steam seal 22 Rear bearing 23 Turbine coupling 24 Front bearing of gear box                             25 Reduction gear 26 Rear bearing of gear box 27 Generator end coupling
Please contact Mahamek personnel directly here, for more information on turbine projects. We gladly receive any steam turbine turn key projects and are willing to discuss any details.

Mechanical Seal and Packing specialist in Thailand

bottom of page